Case for MicroDexed Touch (unofficial)

This case was designed by myself using Sketchup. I added a separate microusb jack to power the MDT from an external usb power pack. The original case did not have any room left to add a usb jack.

The MDT build is a somewhat complicated and precise build. There are no standoffs between the LCD and the main board. The boards are only held together by the 14pin header connection to the LCD. When building the MDT you need to use low profile headers, and cut various headers. Due to this the spacing between the mainboard and the LCD varies, which then means the case/jacks all vary as well. So it is a pretty personal adventure.

Never the less, I created this case and if you spacing between the bottom of the LCD board and the top of the mainboard is 10.6 to 11.1 this case will work for you. If you spacing is outside of that range, you can modify the in/output jacks height and it will work as well. My case and implementation has 4.5mm spacer between the bottom of the mainboard pc