Thingiverse
Case for selfmade heat control unit
by efzwo
3
Downloads
4
Likes
0
Makes
This case is used for a self constructed heat controlling unit.
Components used:
* 1x Raspberry Pi Pico W
* 1x eight-fold relay module https://www.berrybase.de/5v-8-kanal-relais-modul
* 1x 5V 3A Meanwell power unit (https://www.berrybase.de/meanwell-1-kanal-einbau-schaltnetzteil-15w-5v/3a)
* multiple WAGO connectors (221-412, 221-413, 221-415)
The microcontroller is flashed with ESPHome and can be easily controlled with Home Assistant. It enables and disables the relays which are connected to 230V
actuators (e.g. Selfio Alpha 5).
There is a 5V power panel next to the microcontroller which supplies power for multiple Shelly Plus H&T temperature and humidity sensors (one per room).
A top plate is not yet ready.
Components used:
* 1x Raspberry Pi Pico W
* 1x eight-fold relay module https://www.berrybase.de/5v-8-kanal-relais-modul
* 1x 5V 3A Meanwell power unit (https://www.berrybase.de/meanwell-1-kanal-einbau-schaltnetzteil-15w-5v/3a)
* multiple WAGO connectors (221-412, 221-413, 221-415)
The microcontroller is flashed with ESPHome and can be easily controlled with Home Assistant. It enables and disables the relays which are connected to 230V
actuators (e.g. Selfio Alpha 5).
There is a 5V power panel next to the microcontroller which supplies power for multiple Shelly Plus H&T temperature and humidity sensors (one per room).
A top plate is not yet ready.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!