Thingiverse
Case for Vive Ultimate Trackers
by nik8830
1
Downloads
5
Likes
0
Makes
This is a simple case for storing or travelling with your Vive Ultimate Trackers.
The case was designed to fit 4 trackers and the dongle, it has holes for the charging port of each tracker so you can charge without the need to take them out. (The charging ports are designed to fit the included USB-C cable)
Each slot has a number so you can keep track of which tracker is which.
They stay very secure, so no wobbling, banging or rubbing against anything.
IMPORTANT NOTE:
You need to use supports and make sure your supports are dialed in, this is important to print the "hooks" properly, they are what keeps the trackers in place, if they are not printed correctly you'll have trouble inserting the trackers.
Also print in PLA or PETG, ABS will give a lot of trouble with warping.
The case was designed to fit 4 trackers and the dongle, it has holes for the charging port of each tracker so you can charge without the need to take them out. (The charging ports are designed to fit the included USB-C cable)
Each slot has a number so you can keep track of which tracker is which.
They stay very secure, so no wobbling, banging or rubbing against anything.
IMPORTANT NOTE:
You need to use supports and make sure your supports are dialed in, this is important to print the "hooks" properly, they are what keeps the trackers in place, if they are not printed correctly you'll have trouble inserting the trackers.
Also print in PLA or PETG, ABS will give a lot of trouble with warping.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!