Case for Waveshare e-Paper ESP8266 Driver Board

## The design

This is a case for Waveshare's universal e-paper driver board. https://www.waveshare.com/product/modules/oleds-lcds/e-paper/e-paper-esp8266-driver-board.htm

I have a smaller e-Paper display inside a photo frame that uses this board to drive it, so I wanted a small case to contain the board with screw holes so I could attach it to the back of the frame.

The case has a slot for the ribbon cable, and a hole for USB power.

### Options

Because I don't have anything else connected to the driver board (other than the e-Paper display) I made the base of the case thick enough that the pins don't stick out the bottom.

If you need access to the pins in your project, I made another version with a thinner base (for the pins), but where the lid has the screw holes, rather than the base.

I have included STL files for both versions. You can either print the box and lid together, or print them separately. You don't need supports.

### Customising

Hopefully the so