Case With Latches

This is a large case with a latch which fills the bed of the X1C, for putting generic items in. The case dimensions are approximately 255x227. It has four feet on the bottom, so it can easily stand up as pictured. The case is hinged and features functional latches.Boost MeIf you like my work please consider supporting me by subscribing to me on Printables, even if only for a month. Boosts are also welcome, thank you!PartsM3x8 screws x8M3x16 screws x4M3x20 screws x4M3 lock nuts x4M3 washers x4M3 inserts x12 (note this model is designed for Bambu Lab inserts, others may fare less well)AssemblyPlease note to only use washers where indicated.Install four of the inserts into the top section of the case in the holes indicated.In the bottom half of the case install eight inserts into the holes indicated.The hinges on the top part of the case have a hexagonal hole on the inner part of the hinge. Insert one of the M3 lock nuts in the hexagonal hole on each side.Taking care that the lock nuts do