Casper String Lamp

This 3D printed model of Casper the Friendly Ghost captures the beloved character in a floating LED lit display. Designed to be suspended by fine strings, Casper appears as if he’s hovering mid-air.    The lightweight print and smooth, friendly contours make it ideal for displaying it windows, rooms, or as part of a Halloween or themed decoration. Perfect for fans of the classic character, this piece combines nostalgia with the charm of modern 3D printing.   Try not to use the Super Tack plate, taking the print off may damage the strings. When you finish printing, LET IT COOL! If you try to pull it off while it is hot, the strings will bend. This is especially true with this model, the body is very thin and fragile, the plate needs to be cold and the print will pop off without issues. Remove the frame first, place the scraper under and run the perimeter of the frame until it is fully released.   Finally, gently lift the model off the plate. Take your time, if you are having a hard time try placing the plate inside the fridge for 10 minutes and use a sharper blade. Remember to only use it to lift the model, not scrape the plate.     This model uses arachne, so the strings are even thinner then my previous models. Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. There are other variations on the way, such as AMS painted, strings different color and support for the lamp and waterproof pucks. But, you also need to have proper adhesion, clean your plate and watch the print so you get the best results possible.    To light it you will need the standard 3AAA RGBW pucks, either from Aliexpress or bambu lab.  Here is a link from a seller I used before, you get 3 pucks for a euro - Search “rgbw pucks aaa” on aliexpress and pick the best deal for you. It shouldnt cost more than a euro each Relatively simple, assemble the two halves using an assembly jig in the profile, it is basically two rings th