Cast Fireball Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 170x162.07mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.3 PLA+ Sunlu Red Transmission Distance: 6.1 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #16 (1.36mm) swap to Pure Yellow At layer #18 (1.52mm) swap to White for the rest.