Thingiverse
Cat arch
2
Download
0
Likes
0
Makes
Door or wall arch for cats
I mirrored the side piece on Cura and printed them vertically on a raft close together
The arch needs support (I printed it flat on the bed)
Can be scaled in slicer for height and door thickness or altered in Freecad
I used 10% infill and its really strong with a few drops of superglue in the joints
The joining pins required a bit of sanding to fit
I cut the hole in the door and fitted with white silicone.
I mirrored the side piece on Cura and printed them vertically on a raft close together
The arch needs support (I printed it flat on the bed)
Can be scaled in slicer for height and door thickness or altered in Freecad
I used 10% infill and its really strong with a few drops of superglue in the joints
The joining pins required a bit of sanding to fit
I cut the hole in the door and fitted with white silicone.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
