Slicer Discord
Cat Ear Bookmark – 3D-printbaar model van MakerWorld MakerWorld
Hueforge & Lithophane

Cat Ear Bookmark

131 Downloads
99 Likes
96 Makes
Model downloaden
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 48.5x152.4mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Paramount 3D Steel Gray Transmission Distance: 2.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA Sunlu White Transmission Distance: 9 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Steel Gray At layer #11 (0.96mm) swap to Orange At layer #13 (1.12mm) swap to White for the rest.
Categorie
Hueforge & Lithophane
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie