Cat Royalty - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PETG JAYO Black Transmission Distance: 0.3PLA BambuLab Basic Green Transmission Distance: 2PLA BambuLab Gold Transmission Distance: 4PETG JAYO White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #7 (0.64mm) swap to GreenAt layer #11 (0.96mm) swap to GoldAt layer #21 (1.76mm) swap to White for the rest.