Cat under the moon - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm and 130x130mm in size You may print at higher layer heights below the Min Depth of 0.4mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA PolyTerra Army Blue Transmission Distance: 0.3PLA PolyTerra Pastel Banana Transmission Distance: 3.5PLA PolyTerra Cotton White Transmission Distance: 2.5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to BlueAt layer #17 (1.44mm) swap to YellowAt layer #24 (2mm) swap to White for the rest.