cat1

Project: 1cat.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x242.12mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.2 PLA BambuLab Basic Blue Gray Transmission Distance: 3.1 PLA BambuLab Basic whiteTransmission Distance: 3.6This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #14 (1.2mm) swap to Blue Gray At layer #22 (1.84mm) swap to white for the rest.