Catalina 22 Switch panel

this was printed in PETG because it has better attributes for UV light than ABS or PLA. the original print that is in the photos mounted the switches upside down, however the file has been fixed, the original file is also included. as you can see in the 3rd photo i small amount of trimming had to be done, about 3/8 of an inch on the top and about a half a inch on the bottom. i cut it in a V shape to remove as little material as posable and still utilize the original holes. I used 2AWG power cable as it is what i have laying around and have also installed AC power, checkout my profile for more Catalina 22 parts!

a pack of switches is around $10 USD the fuse panel is about $16 USD and the breaker is not necessary but highly recommended and can be found around 10-20 USD.

the switches used in this panel can be found here

https://www.amazon.com/dp/B07QFVRTQG/?coliid=I39F8CL0PKVYQK&colid=35RFBHWZGFSIY&psc=1&ref_=lv_ov_lig_dp_it

the fuse panel i used is here

https://www.amazon.