catch waves not feeling

Project: catch wave2.hfpPrint at 100% infill with a layer height of 0.02mm with a base layer of 0.02mmThe Model is 80x80mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA bambu red Transmission Distance: 4.7 PLA BambuLab Basic Blue Transmission Distance: 3.3 PLA bambu yellow Transmission Distance: 4.1 PLA bambulab grey Transmission Distance: 3.9This print uses 4 unique filamentsSwap Instructions: Start with red At layer #41 (0.82mm) swap to Blue At layer #65 (1.3mm) swap to yellow At layer #103 (2.06mm) swap to grey for the rest.