Cats - Bookmarks Set

GREY CATPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130.18x162.54mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Red At layer #15 (1.28mm) swap to Jade White for the rest. RED CATPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130x157.88mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade Whit