Cats cuddling Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #27 (1.2mm) swap to Jade White At layer #35 (1.52mm) swap to Black At layer #42 (1.8mm) swap to Red At layer #47 (2mm) swap to Yellow At layer #49 (2.08mm) swap to Jade White for the rest. If you get the message with the floating regions when slicing... you can ignore this If you want to resize, scale only x and y. Z must stay as it is