CB350- Throttle Slack Eliminator

If you have replaced your throttle cables, sometimes they are too long. I have around 3/4" of free play at the throttle even with all adjusters maxed out. Here is my fix for it. It is a simple fix that doesn't require cutting your cables or resoldering your barrels. I based this on a 4into1 cable but should work for common motor cables.

It comes in two different lengths. 30mm and 40mm. This is the amount of slack it will remove. My design doesn't allow for less slack to be removed.

I would print in PETG. Hopefully the heat won't be a problem .

USE AT YOUR OWN RISK. I am not responsible for any failures. A failure of the throttle can result in death or injury.