CBR650F Blinker Flush Mount

When you remove the OEM turn signals, it leaves a large pocket in the fairings which makes it really annoying for mounting flush mount blinkers, the blinkers I went with just uses double sided tape so I just needed a part that fills in the recess and allows the wires to pass through. How I Designed This (Learned it from PistonPin's post for his CBR300R adapter on Printables)Step 1:Removed the factory turn signalsStep 2:Slid a piece of paper into the fairing and traced out the shape of the hole on the bottom of the recessStep 3 :Took a picture of the trace normal to the piece of paper, and measured the widest and longest parts.Step 4:Imported the picture into OnShape and scaled the picture to match the dimensions, then traced a line to match the outline. Step 5:Extruded the shape and printed it with minimal infill, then placed the part into the fairing and noticed the recess had a draft, so I printed some iterations and found that the draft was ~3 degrees. (Yes my fairings are crack