Thingiverse
CC-02 Spare Tyre Mount
door rcdesigna
2
Downloads
4
Likes
0
Makes
I wanted a spare tyre mount to put on my CC-02 Ford Bronco but couldn't find anything (apart from really expensive alloy part online) so I designed this.
I haven't had a chance to print yet, so can't guarantee is 100%.
It has a 3mm hole on the top of the mount to attach the tire to the mount.
(Mount= This is 4mm from top of hole to inside).
(Mount#2= This is 8mm from top of hole to inside).
There is also 4x 3mm holes to mount to the body (it has a 5mm top for the screw head to sit in)
The base of the mount (towards the front) is 4mm thick
I haven't had a chance to print yet, so can't guarantee is 100%.
It has a 3mm hole on the top of the mount to attach the tire to the mount.
(Mount= This is 4mm from top of hole to inside).
(Mount#2= This is 8mm from top of hole to inside).
There is also 4x 3mm holes to mount to the body (it has a 5mm top for the screw head to sit in)
The base of the mount (towards the front) is 4mm thick
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!