CC2 Hotend Holder

Made this in FreeCAD to hold spare hotends and nozzles on the side of the printer. There are probably better ways to do it but this works for my situation.

There are four files one each for 0.2mm, 0.4mm, 0.6mm and 0.8mm. The holders use four 8x3mm magnets to attach to the printer case. There are holes on the L and R side of each one for 12x3mm magnets so the holders will attach to each other as well.

You will need 4-8x3mm magnets and 2-12x3mm magnets per holder if making the same as I did. My magnets measure ~2.75mm on the 3mm dimension so the holes have tolerance to press fit the magnets but I also added a little super glue so they don't work their way out with the printer shaking.

Printed in elegoo PLA+ with 0.4 nozzle at 0.2 layer height. Infill 15%.

I painted the numbers with red paint so they are more visible. Tried switching to red filament on the final layer but I didn't purge enough so the red wasn't visible.