Thingiverse
Ceiling fan cap
por saurabhceaseless
3
Descargas
3
Likes
0
Makes
This is a ceiling fan cap, if have broken one then print this and replace
The shaft suspending the fan from the ceiling is 19mm as per this design, 1 mm clearance has been given
Print it in the same orientation as the stl file.
I printed it with 0.4 mm nozzle at 0.2 mm layer height, you can use a 0.6 mm nozzle at 0.3 mm layer height to save some print time.
The shaft suspending the fan from the ceiling is 19mm as per this design, 1 mm clearance has been given
Print it in the same orientation as the stl file.
I printed it with 0.4 mm nozzle at 0.2 mm layer height, you can use a 0.6 mm nozzle at 0.3 mm layer height to save some print time.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
