Ceiling mounted clothes hanger

**Texto disponible en Español más abajo**
# ENGLISH

**Pieces list:**

- 4x 3d printed brackets
- at least 20m of 2.5mm string (it depends on your drying rack size and place
- 20x20mm (1mm thick) aluminum square tubing
- 4x (minimum) small pulleys
- 2x (minimum) eyebolts

This is a ceiling mounted clothes hanger. Simple and effective. As the frame is made of 20x20mm aluminum square tubing, final size is fully customizable.

You need to print the piece 4 times.
Cut your aluminum tubing to size. Then, on the short size drill holes to weave some string. I spaced the holes 60mm. Tie a knot as tight as possible at the start and the end.
Use the printed bracket to assemble the structure. You may need to sand or glue so the bracket slides inside the aluminum.
Introduce a string in the holes of the bracket and tie a knot.

Screw your pulleys to the ceiling in a similar way as depicted on the photos. It does not really need no be 100% perfect as long as the pulleys are