Celestial Guardian Statue Light Box

An elegant and simple light box to display the Celestial Guardian statue by 3D Fun @blythey Other Components: 1x 5mm High Bright, Wide angle LED1x 82ohm resistor1x 6mm hole standard electronics toggle switch1x 12v 23A gate remote battery1x short piece of wire Assembly:Step 1.Glue the 5mm LED into the hole cut out on the top of the Light Base. Step 2.Assemble the Base Insert with the toggle switch, resistor and Battery connections. I just used the wire from the resistor coiled in on the + battery terminal end. I have made groves in the insert for the wire to be placed neatly and glued in place. the - terminal battery end I used a small piece of copper wire, coiled in the same way and placed in the groves made in the insert. Step 3.Fit the Assembled Base Insert into the Assembled Light Base.This is a snug fit and must be pushed all the way in for the battery to fit Step 4.Solder everything together.The Copper wire from the - battery terminal gets soldered to the one end of the toggle swi