Thingiverse
Celestron AVX Bubble Level
par bowiesjustaknife
1
Téléchargements
2
Likes
0
Makes
Heavily inspired by other designs, especially the RedneckDesign version.
I wanted something that would stay securely attached to the mount at all times, and double-sided tape wasn't cutting it. This extends the mount around the Dec screw so it can't come off. I put some double-stick foam tape on the inside just to tighten up the tolerances and prevent rattling. Works great.
I measured an angle of 14 degrees, the other designs seem to have an angle of 14.4 degrees. I find it more likely that the manufacturer would use a round number, so that's what I'm going with.
Anyhow, should be close enough.
I wanted something that would stay securely attached to the mount at all times, and double-sided tape wasn't cutting it. This extends the mount around the Dec screw so it can't come off. I put some double-stick foam tape on the inside just to tighten up the tolerances and prevent rattling. Works great.
I measured an angle of 14 degrees, the other designs seem to have an angle of 14.4 degrees. I find it more likely that the manufacturer would use a round number, so that's what I'm going with.
Anyhow, should be close enough.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
