Thingiverse
Cemetery Vase 2
por Hadgee
6
Descargas
13
Likes
0
Makes
Hi, not a direct RE-MIX but certainly inspired by SLWise to make my own variation on the idea.
I wanted to be able to screw the vase together and managed that using OnShape Cad Design.
You can setup a 'OnShape' free account and work with my file to add your own text to the plaque.
https://cad.onshape.com/documents/1a24c372dd00fd9551c4b80c/w/197f184ecabe5902f3d3a280/e/82761632ce81845a87c81b78?renderMode=0&uiState=66625b2d6259df03ebc47e56
You will make a copy and can change whatever you like.
As you can see it printed perfectly except the 'Z' print line which I will address when I print again.
I printed at 10% infill at .2 layer with supports. This turned into a nice substantial Vase that should last. I printed in PLA but for longevity outside I would recommend PETG.
Very little cleaning of the threads required.
I wanted to be able to screw the vase together and managed that using OnShape Cad Design.
You can setup a 'OnShape' free account and work with my file to add your own text to the plaque.
https://cad.onshape.com/documents/1a24c372dd00fd9551c4b80c/w/197f184ecabe5902f3d3a280/e/82761632ce81845a87c81b78?renderMode=0&uiState=66625b2d6259df03ebc47e56
You will make a copy and can change whatever you like.
As you can see it printed perfectly except the 'Z' print line which I will address when I print again.
I printed at 10% infill at .2 layer with supports. This turned into a nice substantial Vase that should last. I printed in PLA but for longevity outside I would recommend PETG.
Very little cleaning of the threads required.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
