Centauri Carbon toolhead cover (no riser needed)

I got the Elegoo Centauri Carbon knowing the quirks it had.One of these is the strain on both the PTFE tube and the USB cable in certain positions with the stock chain mounting.I scoured the web for solutions and all of the good ones seem to require a riser, which i didnt want.So i decided to design something of my own to address the strain issues without needing a riser.This model has two versions (choose the build plate you want to print):Model A: has the rotatable PTFE tube guide and a cable strain relief clamp (this is the uploaded profile)Model B: has the rotatable PTFE tube guide onlyThe clamp for the cable strain relief is required only with model A, if you go for model B, omit it.Both models have adequate air vents for any heat buildup in the toolhead crevice below. The PTFE tube simply goes through the guide, then you can position the cover over the cable and secure it with the original chain screw.I would suggest you remove 5 chain links as shown in my images and use a zip ti