Central Park Bench

Roughly based on a common style of bench in New York City's Central Park. There are two leg widths, and two bench widths in this set. The bench slat widths are 100mm and 170mm, allowing for a wide or compact bench. The legs are provided in 4mm width and 7mm width.

# Scaling

If you take a standard Central Park bench height as 80cm, or 800mm, tall, a 12:1 scaling would give you a miniature bench 66.7mm tall - this would mean **printing at approximately 70% ** of this model scale.

# Printing

All of the pieces are provided as individual STLs. You will need to print:

- **2 legs**
- **7 slats**

The two legs can easily be printed together, even in a small print volume, by rotating one leg 180° and nesting the legs close together.

I've tested the print with the **legs sliced with 0.06mm layers** and **slats sliced with 0.20mm layers**.

# Assembly

Depending on your layer size when slicing, the slats will fit more or less snug to the legs. A small bit of glue betwe