Thingiverse
Learning
Vai al Modello
Centrifugal Pump
37
Download
24
Likes
0
Makes
3D Printed Centrifugal Pump - Designed with a closed vane impeller and a suction eye to accommodate a standard UK 2 litre bottle. The coupling was designed to fit a 3.2mm RC motor shaft but by using a longer (150mm) coach bolt it can also be used with a drill.
Whilst testing at 1800RPM the pump has a capacity of 13litres/min at around 0.9m. It's maximum pump head is 1.2m.
A video of the design and testing can be found here - https://youtu.be/vWLl_yMuXrc.
Whilst testing at 1800RPM the pump has a capacity of 13litres/min at around 0.9m. It's maximum pump head is 1.2m.
A video of the design and testing can be found here - https://youtu.be/vWLl_yMuXrc.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
