Ceramics Stamp

This is a stamp I designed to stamp ceramics/clay/pottery with a logo or design.I have made it with a personalized logo that wont be downloadable, but can be seen in the pictures.I uploaded an empty design that can be edited in your slicer or directly through the onshape link I will provide below.Basically, you should emboss your own design on the biggest of the two circular sides. The best height of the design is 2mm. It can be .6 or .4mm thick (.6 is sturdier, but more difficult to stamp partially dried clay, like with clay pouring)You can also deboss .1mm on the smallest circle to create a multicolor version with the design visible on the handle part of the sstamp. (Like in the pictures)Printing in 2 colors can be achieved without a MMU, by setting your printer to swap colors every layer. I will provide the explanation for the method below.When asked, I could add some simple designs and upload them for you. (Like a shape or letters)Printing instructions:.2mm layer height is finePrin