Cessna 172 G1000 Switch Panel

Master and Avionics switch cut outs are designed to work with this switch/housing: https://www.thingiverse.com/thing:2794629

I have included my own rocker switch design that is very similar; key differences include:
a. Slightly longer switch to better fill the housing opening.
b. One switch has a slot which allows the Alt/Bat to operate more like the real switch when used in conjunction with a 2mm stainless rod.

Assemble plates and spacers using M2x5mm screws:
https://www.amazon.com/dp/B082XXXRV6?psc=1&ref=ppx_yo2_dt_b_product_details

Text is designed to be printed with a filament swap, but could be carefully painted (I like to use Sharpie Oil Based Paint Markers). For best text results, enable "Print Thin Walls" in your slicer settings. There is a Text_Test.stl file that can be used to test your print settings for text and filament swap prior to printing the entire part.

Dimming Knobs are designed to work with this potentiometer/swtich combo:
https://www.amazon.com/gp/