Thingiverse
Cetus XY Calibrator
par imaicom
12
Téléchargements
4
Likes
0
Makes
The genuine model is difficult to measure because there is no edge. Easy to measure with the calipers. If this setting is 100 mm, the error will be within 0.1 mm.
https://thingiverse-production-new.s3.amazonaws.com/assets/bb/9b/ce/5b/55/_2019-11-19_20.04.11.png
I think it works for all Tiertime's printers.
The 2mm version is for ABS printing.
[ How to use ]
1. UP Studio > Calibration > Vertical Calibration > XY > Press the Default button. and, Press the Save button.
2. Print the CetusXYCalibrator.stl file. Place a reference dot in the foreground.
3. Measure the length of X1 and X2 with calipers. The accuracy is better when the raft is not removed.
4. Enter X1 and X2.
5. Press the Save button.
6. Print the CetusXYCalibrator.stl file. Place a reference dot in the foreground.
7. Measure the length of X1 and X2 with calipers. The accuracy is better when the raft is not removed.
8. If X1 and X2 are the same length, there is no problem.
9. If the length is differe
https://thingiverse-production-new.s3.amazonaws.com/assets/bb/9b/ce/5b/55/_2019-11-19_20.04.11.png
I think it works for all Tiertime's printers.
The 2mm version is for ABS printing.
[ How to use ]
1. UP Studio > Calibration > Vertical Calibration > XY > Press the Default button. and, Press the Save button.
2. Print the CetusXYCalibrator.stl file. Place a reference dot in the foreground.
3. Measure the length of X1 and X2 with calipers. The accuracy is better when the raft is not removed.
4. Enter X1 and X2.
5. Press the Save button.
6. Print the CetusXYCalibrator.stl file. Place a reference dot in the foreground.
7. Measure the length of X1 and X2 with calipers. The accuracy is better when the raft is not removed.
8. If X1 and X2 are the same length, there is no problem.
9. If the length is differe
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !