Cetus3D Heated Bed adapter

A set of supports to adapt a 214 x 214 mm heated bed to the Cetus 3D printer bed.
The original bed must be drilled with a 6mm drill bit.
The distance between the holes has a distance of 172.6 mm.

Each set of supports must be printed twice, one normal and one mirrored.

Extra material:
- 4 M5 x 35 mm countersunk screws.
- 4 M5 washers.
- 8 M5 nuts.
- 4 M3 x 12 mm countersunk screws.
- 4 M3 washers.
- 4 M3 nuts.
- 4 D8 x 18 mm springs.

The heated bet is available at: https://amzn.eu/d/crSEkDa