Thingiverse
CeXY H-Bot
par xDOOTx
93
Téléchargements
93
Likes
0
Makes
*UPDATE!* The second version of the printer (MK2) is released!!
with updated parts and some minor changes; I also added a BOM and a simple building instruction; *GO* --> https://www.thingiverse.com/thing:3383389
********************************************************************************************************
"CeXY H-Bot" is my version of a CoreXY (H-Bot) 3D-printer;
The goal was to design a solid 3D-printer with standard parts, that's easy to build, use and maintain but not too expensive;
It's built with 2020 aluminium extrusions, NEMA17 motors, 8mm steel rods, LM8UU bearings, 8mm lead screws (l=300mm), a 200x200 heat bed, standard endstop switches, a 5015 radial fan and an E3D_V6 Hotend;
The parts are printable without support and have tolerances between 0.1 - 0.2 mm; they are designed for M5x8 cylinder head screws (frame); at the moment not all of the parts are oriented correctly for printing - don't forget to rotate!
I used the Drakon Extruder (http
with updated parts and some minor changes; I also added a BOM and a simple building instruction; *GO* --> https://www.thingiverse.com/thing:3383389
********************************************************************************************************
"CeXY H-Bot" is my version of a CoreXY (H-Bot) 3D-printer;
The goal was to design a solid 3D-printer with standard parts, that's easy to build, use and maintain but not too expensive;
It's built with 2020 aluminium extrusions, NEMA17 motors, 8mm steel rods, LM8UU bearings, 8mm lead screws (l=300mm), a 200x200 heat bed, standard endstop switches, a 5015 radial fan and an E3D_V6 Hotend;
The parts are printable without support and have tolerances between 0.1 - 0.2 mm; they are designed for M5x8 cylinder head screws (frame); at the moment not all of the parts are oriented correctly for printing - don't forget to rotate!
I used the Drakon Extruder (http
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
