CH47F

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 250x166.67mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 1.52mm and the Actual Thickness is 1.51986mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #11 (0.96mm) swap to White for the rest. I WILL SOON PUBLISH THE MODEL DIVIDED INTO 4 PLATES