Chain Conveyor

door letsgo00 · Engineering

111 Downloads

27 Likes

0 Makes

This conveyor is 25mm wide and 20mm long. It has M3 holes for mountingPrinting instructions:- Print pieces flatAssembly instructions:- Print all conveyor parts (You need multiple conveyor belt pieces, alternating with one flat or top pieace and one bottom piece)- Assemble conveyor parts with M2 20mm screws- Press a 605ZZ bearing into the parts- Place N20 motor inside the middle part, route the wires through the side hole- Holes for M3 threaded inserst are available on the gears- Use M5 screws to secure shafts- Screw left right and middle together with M3 screws

conveyorbelt