Thingiverse
Chalk Line
door terminalObserver
4
Downloads
2
Likes
0
Makes
Chalk line.
Install some natural fiber twine or heavy gauge string. Fill with chalk or some pulverized pigment. I used some roman black earth pigment I had.
Have a look at the openSCAD file if you want to customize it.
I printed with PETG but anything will work.
A bit of super glue is required to secure the two halves of the case after its all said and done.
The pulley was a bit tricky to print the upper half, could adjust the slope of the cylinders to make this easier if you are having issue.
I glued the handle on the top and screwed it as well.
Install some natural fiber twine or heavy gauge string. Fill with chalk or some pulverized pigment. I used some roman black earth pigment I had.
Have a look at the openSCAD file if you want to customize it.
I printed with PETG but anything will work.
A bit of super glue is required to secure the two halves of the case after its all said and done.
The pulley was a bit tricky to print the upper half, could adjust the slope of the cylinders to make this easier if you are having issue.
I glued the handle on the top and screwed it as well.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
