Slicer Discord
Chamber heater PSU + temp controller case – 3D-Druckmodell von MakerWorld MakerWorld
3D Printer Accessories

Chamber heater PSU + temp controller case

268 Downloads
105 Likes
116 Makes
Zum Modell
I made this case for the Meanwell LRS-350 (works for LRS-200 as well) power supply and STC-1000 temp controller for a chamber heater for the X1/P1. It will of course work with any other chamber heater or as a general PSU enclosure. PTC heater holder: https://makerworld.com/en/models/372101 It has a cutout of the AC power plug and switch, a DC barrel plug as well as a hole to pass throgh the temp sensor. The PSU can just attach to the bottom of the case via some double sided nano tape. There is a hole in the bottom back of X1/P1 that you can fish the wires through without any cutting, crimping or soldering them after pulling them through. M4 screws to fix the lid to the body. Meanwell LRS-350-24v: https://a.aliexpress.com/_mOqtUxD STC-1000 temp controller, you need the 24v version: https://a.aliexpress.com/_mNKCdOT 200w PTC heater, again the 24v version: https://a.aliexpress.com/_mPJSRgP AC plug and switch: model AC-04C https://www.aliexpress.com/item/1005006361356458.html also I just s
Kategorie
3D Printer Accessories
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
ABS, Nylon, ASA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

maxim3D veröffentlicht auch auf

20 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen