chameleon hueforge

von Michele MM3D · Hueforge & Lithophane

46 Downloads

52 Likes

21 Makes

chameleon hueforged Here you can find all my HueForge creations, https://makerworld.com/en/@MicheleMM3D/collections/503504 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Orange At layer #9 (0.8mm) swap to BambuLab Green At layer #10 (0.88mm) swap to Yellow At layer #13 (1.12mm) swap to Jade White for the rest.