Slicer Discord
ChamferPro | The easy printable chamfering machine even for Metal – 3D-printbaar model van MakerWorld MakerWorld
Other Hobby & DIY

ChamferPro | The easy printable chamfering machine even for Metal

8 Downloads
9 Likes
1 Makes
Model downloaden
With this easy printable Chamfertool, everybody is able to get beautiful and consistent chamfers on metal pieces. With the fence you can get perfect champfers on long straight edges, and with the three different sized stops with 30, 90 and 120 degree you can chamfer any curve. Goodbye filing! All you need is:8x Ruthex M5 Heat inserts4x M4 Nut4x DIN912 M4x16mm4x ISO10642 M5x12mm4x ISO7380 M5x20mm1x 6mm 90° carbite Chamfermill1x Router with 43mm Euro-Adapter (Kress, ABM, Suhner, Mafell etc) I used PLA-CF as the Material, with PETG as Support Interface. PLA-CF has high stiffness, and prints without warping which is nice for the table. But if you intend to use this Chamfertool on long sessions, where the Router gets hot, PETG-CF or even PAHT-CF would be better options. I was able to easily get 1mm Chamfers in 7075 Aluminium. Also perfect for removing elephantfoot or brims.
Categorie
Other Hobby & DIY
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, PETG, Carbon Fiber
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

techam publiceert ook op

20 extra modellen op 2 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie