Charger 1970

One of my favorite cars, i printed it as follows. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 199.99x133.39mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA Creality CR Black Transmission Distance: 0.6SA Film Silk Blue Transmission Distance: 3PLA Creality Ender Red Transmission Distance: 1.5PLA+ Creality Ender Green Transmission Distance: 10PLA Creality Ender Lemon Yellow Transmission Distance: 6.5PLA+ Creality CR Silver Transmission Distance: 2PLA Creality CR White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to SA BlueAt layer #9 (0.8mm) swap to RedAt layer #11 (0.96mm) swap to GreenAt layer #16 (1.36mm) swap to YellowAt layer #20 (1.68mm) swap to SilverAt layer #24 (2mm) swap to White for the rest.