Charizard Hueforge - Pokemon

Projet: Dracaufeu.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 1.28mm The Max allowed Thickness is 3.44mm and the Actual Thickness is 3.44mm Filaments utilisés: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Instructions de changements: Commencer par Black At layer #19 (1.6mm) swap to Ice Blue At layer #21 (1.76mm) swap to Black At layer #22 (1.84mm) swap to Red At layer #27 (2.24mm) swap to Yellow At layer #29 (2.4mm) swap to Jade White At layer #31 (2.56mm) swap to Yellow At layer #32 (2.64mm) swap to Ice Blue At layer #35 (2.88mm) swap to Jade White pour le reste.