Charizard Vs Godzilla HueForge

This is a fun Hueforge i created! Two iconic monsters as they battle it out! I used a Bambu H2C to print this! Enjoy!! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 243.23x200mm in sizeI used this HueForge frame found here https://makerworld.com/en/models/1067076-universal-frame-hueforge-pictures?from=search#profileId-1056273 You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue Gray At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to Yellow At l