Charizart Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.88mm and the Actual Thickness is 2.88mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #cd007b PLA BambuLab Basic Magenta Transmission Distance: 3 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 2.4This print uses 6 unique filamentsSwap Instructions: Start with Charcoal At layer #6 (0.56mm) swap to Magenta At layer #9 (0.8mm) swap to Jade White At layer #11 (0.96mm) swap to Pumpkin Orange At layer #20 (1.68mm) swap to Yellow At layer #24 (2mm) swap to Jade White At layer #33 (2.72mm) swap to Turquoise for the rest.