Charmander Hueforge

DO NOT CHANGE THE Z-HEIGHT. For ease of use, i suggest unchecking the “UNIFORM SCALE” and change X and Y Percentace only when editing size; Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Matte Lemon Yellow Transmission Distance: 4PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions:Start with CharcoalAt layer #13 (1.12mm) swap to RedAt layer #17 (1.44mm) swap to Lemon YellowAt layer #25 (2.08mm) swap to Ivory White for the rest.