Charmander unique wireframe // 23g

Charmander unique wireframe // 23g Printed in 3 hours I recommend using adhesive spray or a glue stick, but it is also possible to print it without.WARNING: be carefull with removing the print, bend the buildplate a few times en use the scraper!Remove the support carefully with a pair of pliers. Beautifull piece of art that is loved by young and old!Gonna print them all ;) If you want to slice the model by yourself, make sure you lower the Z-height by 1,5mm or more. This way you create a bigger surface that touches the build plate, add an outer brim on it too.I also drew the supports myself on the critical surfaces only, so there will be no support inside the model. f you want to slice the print and draw the supports yourself, use this settings:Line width for supports (in Quality settings): 'Around 50%' of what your main line width is (eg: 0.25mm on a 0.4mm nozzle printing at 0.42mm line width) - THIS IS A KEY SETTINGType: Tree (Manual, draw support on the crucial points)Style: