charmeleon warrior

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.09x200mm in size You may print at higher layer heights below the Base Thickness of 0.72mm The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.72mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9 #ff0000 PLA Generic red Transmission Distance: 5 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #0ab9e9 PLA Copymaster 3D Baby Blue Transmission Distance: 3.1 #fce300 PLA Kexcelled Yellow Transmission Distance: 6.7 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 4 This print uses 7 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Hot Pink At layer #14 (1.2mm) swap to red At layer #15 (1.28mm) swap to Pumpkin Orange At layer #19 (1.6mm) swap to Baby Blue At layer #24 (2mm) swap to Yellow At layer #31 (2.56mm) swap to Ivory White for the rest.