Cheese Coaster - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 120x73.69mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Sunlu White Transmission Distance: 9 This print uses 3 unique filamentsSwap Instructions: Start with Orange At layer #15 (1.28mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.