Thingiverse
Cherries
por vbldv
153
Descargas
119
Likes
0
Makes
Realistic Cherries. Designed per request of my friend for Christmas
The model can be scaled up and printed larger than the original.
To successfully print the stem use the horizontal orientation as shown in the example image, use supports with brim and use 100% infill.
See post-printing instructions for assembly.
To allow the cherries to stand in the desired position you will need to flatten the bottom of the cherries, you can do so by placing the model in the desired position and slightly lower it below the printing surface, lowering it by -1.5 or -2 mm is enough to make it stand. The slicer will stitch and flatten the area just above the printing surface. You can orient the model in the way you like prior to lowering it below the surface :-)
The model can be scaled up and printed larger than the original.
To successfully print the stem use the horizontal orientation as shown in the example image, use supports with brim and use 100% infill.
See post-printing instructions for assembly.
To allow the cherries to stand in the desired position you will need to flatten the bottom of the cherries, you can do so by placing the model in the desired position and slightly lower it below the printing surface, lowering it by -1.5 or -2 mm is enough to make it stand. The slicer will stitch and flatten the area just above the printing surface. You can orient the model in the way you like prior to lowering it below the surface :-)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
