Cherry MX Style Switch Container

I wanted a container for my switches and decided I could design one having seen no designs like this. The original files were based off of this, https://grabcad.com/library/cherry-mx-1 I simply modified it to turn it into a container.

‎

Scaling:
At 100% scale do not expect to fit more than 100 switches.
At 90% scale do not expect to fit more than 70 switches.

*If you need more or less than these quantities scale at your own guesstimate, feel free to share what scale and quantity worked for you in the comments and I may add it to this description.*

‎‎

How To Print: I suggest printing the Bottom Housing (BH.stl), Top Housing (TH.stl), then the Stem (STM.stl).

Bottom Housing (BH.stl): Print with 10-20% infill with supports.

Top Housing (TH.stl): Print with 10-20% infill with supports. Remember to flip the model so it is laying flat upside down.

Stem (STM.stl): Print with 10-20% infill with supports.


I simply glued the stem to the top housing to complete it. It ma