Chibiusa Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 139.36x200mm in size, for A1mini, if you want to scale, remember that Z must remain at 100%. You may print at higher layer heights below the Min Depth of 0.96mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA Overture Matte Pink Transmission Distance: 2.5 PLA sunlu red Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Pink At layer #15 (1.28mm) swap to Black At layer #17 (1.44mm) swap to red At layer #19 (1.6mm) swap to Pink At layer #21 (1.76mm) swap to Jade White for the rest.